Back
Learn more about our
PE100 Polyethylene Pipe Metric DN450 SDR17 x 12 m Sewerplex Black with Grey stripe Cream interior
PHXC10450M
Overview
Technical Guide
View
Product Properties
Size/Diameter
450MM
Length
12M
Primary Material
POLYETHYLENE
Joint Type
Electrofusion, compression, butt-weld, mechanical
Colour
Grey stripe with light interior
Allowable Operating Temperature - Degrees
Refer Page 3_Table 2 | https://www.iplex.com.au/assets/Uploads/dc73cc0a04/POLIplex-PE-Pipes-Fittings-Technical-Guide.pdf
Allowable Operating Pressure - 20 Degrees Celsius
1000 kPa @ 20°C
Minimum Radius of Curvature
25 (x DN) Ref: POP202 Nov2016
Unprotected UV Exposed
2 years in accordance with AS/NZS 2033:2008
Maximum Support Spacing of Pipe Graded
1.50m (If longer spans required, refer Iplex Sales Engineer)
Maximum Support Spacing of Pipe Vertical
3.00m
Mechanical Properties
Ultimate Tensile Strength
N/A
Yield Strain
0.1
Yield Stress
25 MPa
Compressive Strength
32MPa
Tensile Modulus
900 MPa
Hardness Shore D
63
Poissons Ratio
0.4
Design Stress
8 MPa
Thermal Properties
Coefficient of Thermal Expansion
1.8 × 10⁻⁴/°C
Thermal Conductivity
0.38W/m.K
Specific Heat
1.9 kJ/kg·K °C
Vicat Softening Temperature
116°C
Flammability
Supports combustion, will burn when sufficient heat and oxygen are provided
Fire Index - Ignitability
13
Fire Index - Smoke Developed
3
Fire Index - Spread of Flame
7
Fire Index - Heat Evolved
6
Dimensions
Size/Diameter
450MM
Wall Thickness
26.7mm
Standards & Accreditations
Product Standard
Manufactured to AS/NZS 4130 from resin compounds complying with AS/NZS 4131
Learn more about our
Poliplex PE100 Pipe products
Complimentary products you may be interested in...
Want more information?
Browse all products
Need help?
To speak with an Iplex sales & service team member