The Yellow inner linner allows for ease of visual inspecting during installation commissioning.
SewerMAX® has been approved by all of the major water authorities in australia for gravity sewer application.
SewerMAX® pipe provide a higner factor of safety with a minimum stiffiness of not less than 10000N/m.m and are classified as SN10. SewerMAX® is suitable for cover heights of 2 to 13 meters. A full structure analysis to AS/NZS 2566.1 should be completed to confirm suitability.
SewerMAX® is made of polypropylene and therefore exhibits resistance to a wide range of chemicals and solvents. SewerMAX® is approved for use in industrial severs.
SewerMAX® pipes is manufactured in diameters, DN225, DN300, DN375, DN450, DN525 and DN600.
SewerMAX® pipes and fittings are manufactured with a spigot and socket rubber ring jointing system.
No, The inner wall is a smooth liner, providing excellent hydraulic performance.
Yes, Rubber ring joint adaptors are available from Iplex Pipelines.
Both BlackMAXTM and SewerMAX® pipe are can be easily repairs with purpose designed repair clamps.
Yes, provided appropriate methods are used. For complete information, refer to PIPA Guideline, POP205.
SewerMAX® pipe has been successfully used for relining existing corroded pipes and in boring application. The ground conditions and method of installation should be discussed with Iplex to determine its suitability.
Yes, Both BlackMAXTM and SewerMAX® conforms with AS/NZS 5065 ‘Polyethylene and polypropylene pipes and fittings for drainage and sewerage applications. SAI Global also certifies both products to the Australian and New Zealand standard.
Yes, The Product appraisal 03/05 SewerMAX® are regarded as fit for purpose and rated ‘A’ with a life expectancy in excess of 100 years!
A full range of standard fittings, including bends, tees, junctions, closed ends, couplings, plugs, reducers, saddles and adaptors are available providing a complete pipeline system.