The EziPit is an Easy Decision for Modular Sewer Maintenance
The Iplex EziPit range is a modular polypropylene sewer pit system for buried gravity sewer applications. Available as the EziPit 425 Sewer Maintenance Shaft, EziPit 600 Sewer Maintenance Chamber and EziPit 1000 Sewer Maintenance Hole, the range provides a lightweight and easy-to-install solution for sewer inspection and maintenance.
EziPit features integrated swivel sockets for on-site adjustment, adjustable sewer pit risers and corrosion-resistant polypropylene construction. Its modular components provide a practical solution for positioning, installation and ongoing sewer maintenance.
For sewer pit riser dimensions, component information and installation requirements, download the EziPit Technical Guide below.
EziPit Maintenance Holes, Maintenance Chambers and Sewer Pit Risers
Explore the EziPit Product Range
TGPP425B
EziPit® PP Corrugated Riser DN425 x 2000 mm Orange PL x PL
TNGPP1000AS
EziPit® 1000 (PP) Corrugated Riser x 1200mm (Allows up to 2.2m unit)
TGB425T150
EziPit® 425 (PP) Base x Tee x DN150 DWV RRJ
TNGB100030090
EziPit® 1000 (PP) Base x 90° x DN300 DWV RRJ
TGB600T225
EziPit® 600 (PP) Base x Tee x DN225 DWV RRJ
Features & benefits
Swivel Sockets
EziPit is the only sewer maintenance structure with fully integrated swivel sockets in the base. These sockets can rotate up to 7.5 degrees in any direction. This permits on site adjustment in the trench resulting in narrower trench alignments and reduced excavation.
Flat base
EziPit is designed with a flat base for ease of positioning in the trench. The design of the channel eliminates the need for a fall across the base. The base also include smooth surfaces for excellent hydraulic performance.
GATIC® Cover
The EziPit top hat cover was designed by GATIC for Australian conditions. The top is assembled on top of the riser and sealed with a rubber ring to establish a watertight seal.
Durable Polypropylene
High-quality polypropylene provides long-term durability, high resistance against acid sulphate soils and attack from hydrogen sulphide gas.
Sealed Connections
EziPit sealing rings were designed by Iplex for Australian conditions to ensure water tight joints and resistance against tree roots.
Trafficable
EziPit’s riser is manufactured with a single wall profile for flexibility. It allows the EziPit to deflect traffic loads, absorb ground movement and resist external loads without damage. The riser can be easily cut on site to adjust the height of EziPit in the trench to the required depth.
