Do you have a water supply problem? Look no further. Iplex manufactures and supplies pipeline solutions for water supply with a extremely large and comprehensive range of plastic pressure pipes and fittings from 15mm to 3000mm diameter.

To support and assist our water supply customers Iplex has experienced engineers and technicians who are available to help in pipeline design, product selection, installation advice and cost benefit analysis.

More information is available by clicking on the appropriate product section. Water supply products available from Iplex include the following:

• PVC-U Pressure pipes and fittings 15mm to 80mm in a variety of pressure classes. PVC-U pressure pipes have been installed in Australia since the 1960's offering strength, flexibility and corrosion resistance. The pipes are manufactured to AS/NZS 1477 with two designated diameter series. Series 1 is white in colour with both rubber ring and solvent weld joints. Series 2 (Blue Brute), blue in colour comes with rubber ring deflection joints and is dimensionally compatible with cast iron, ductile iron and AC pipe.
  
  

• PVC-M pipe - is the standard pressure pipe in diameters 100 to 575mm. Iplex has replaced most of the PVC-U range with PVC-M. These pipes are compatible with PVC-U series 1 and 2 and are known as White Rhino and Blue Rhino respective.
  
  

• Biaxially oriented PVC (PVC-O) is a new technology pressure pipe in diameter 100 to 300 mm. Also known as ApolloBLUE^TM, it has greater flow rates for a given pipe size together with exceptional strength and toughness.
  
  

• Polyethylene POLIplex pipe systems - pipe size range from 16mm to 1000mm in pressure classes from PN4 to PN20. Fittings include
  
  

• Flowtite - Glass reinforced plastic (GRP) pressure pipe and fittings are available from DN80 to DN300. They are manufactured in classes from PN1 to PN32. That is at 3200 kPa these are the highest rated pipes supplied by Iplex.
  
  

• Iplex Pro-Fit - Polybutylene hot and cold water domestic plumbing system is available in DN18 and DN22, suitable from pressures up to 1600 kPa.
  
  

• Iplex K2^TMPEX pipes and fittings are available for domestic hot and cold systems in DN16, DN20 and DN25 sizes suitable for pressures up to 2000 kPa.
  
  

Information on individual products can be accessed via Iplex's large product database.

For help on specifying, designing or ordering any of the Iplex water supply products ph: 13 18 40, fax 13 18 60 or email sales@iplexpipelines.com.au.

PIPELINE DESIGN TOOLS NOW AVAILABLE ON THE WEB

Iplex pipeline design tools can be accessed on the Iplex Website.

Iplex Pipeline Design is a program which enables the user to undertake the structural design of a buried flexible pipeline. Click for a free demonstration and download.

Hydraulic Flow Calculator - This program can be used by designers of water supply, sewerage, irrigation or industrial pipelines, and has been made available as an alternative to using Flow Resistance Charts. It allows the user to select a pipe from the Iplex Pipeline range suitable to meet the hydraulic flow requirements of any single pipeline.

Chemical Resistance Guide - click here for information on chemical resistance properties for Iplex pipe products.

Can't find the fitting that you are looking for? Try the Iplex product search database.

Looking for product dimensions? CAD drawings now available for pressure fittings. Try Iplex product search database.